Vert.x-Web is a set of building blocks for building web applications with Vert.x. Think of it as a Swiss Army Knife for building modern, scalable, web apps.
Vert.x core provides a fairly low level set of functionality for handling HTTP, and for some applications that will be sufficient.
Vert.x-Web builds on Vert.x core to provide a richer set of functionality for building real web applications, more easily.
It’s the successor to Yoke in Vert.x 2.x, and takes inspiration from projects such as Express in the Node.js world and Sinatra in the Ruby world.
Vert.x-Web is designed to be powerful, un-opionated and fully embeddable. You just use the parts you want and nothing more. Vert.x-Web is not a container.
You can use Vert.x-Web to create classic server-side web applications, RESTful web applications, 'real-time' (server push) web applications, or any other kind of web application you can think of. Vert.x-Web doesn’t care. It’s up to you to chose the type of app you prefer, not Vert.x-Web.
Vert.x-Web is a great fit for writingRESTful HTTP micro-services*, but we don’tforce* you to write apps like that.
Some of the key features of Vert.x-Web include:
Routing (based on method, path, etc)
Regular expression pattern matching for paths
Extraction of parameters from paths
Content negotiation
Request body handling
Body size limits
Cookie parsing and handling
Multipart forms
Multipart file uploads
Sub routers
Session support - both local (for sticky sessions) and clustered (for non sticky)
CORS (Cross Origin Resource Sharing) support
Error page handler
Basic Authentication
Redirect based authentication
Authorisation handlers
JWT based authorization
User/role/permission authorisation
Favicon handling
Template support for server side rendering, including support for the following template engines out of the box:
Handlebars
Jade,
MVEL
Thymeleaf
Apache FreeMarker
Pebble
Response time handler
Static file serving, including caching logic and directory listing.
Request timeout support
SockJS support
Event-bus bridge
CSRF Cross Site Request Forgery
VirtualHost
Most features in Vert.x-Web are implemented as handlers so you can always write your own. We envisage many more being written over time.
We’ll discuss all these features in this manual.
To use vert.x web, add the following dependency to the dependencies section of your build descriptor:
Maven (in your pom.xml):
<dependency>
<groupId>io.vertx</groupId>
<artifactId>vertx-web</artifactId>
<version>3.6.2</version>
</dependency>Gradle (in your build.gradle file):
dependencies {
compile 'io.vertx:vertx-web:3.6.2'
}Vert.x-Web uses and exposes the API from Vert.x core, so it’s well worth getting familiar with the basic concepts of writing HTTP servers using Vert.x core, if you’re not already.
The Vert.x core HTTP documentation goes into a lot of detail on this.
Here’s a hello world web server written using Vert.x core. At this point there is no Vert.x-Web involved:
def server = vertx.createHttpServer()
server.requestHandler({ request ->
// This handler gets called for each request that arrives on the server
def response = request.response()
response.putHeader("content-type", "text/plain")
// Write to the response and end it
response.end("Hello World!")
})
server.listen(8080)We create an HTTP server instance, and we set a request handler on it. The request handler will be called whenever a request arrives on the server.
When that happens we are just going to set the content type to text/plain, and write Hello World! and end the
response.
We then tell the server to listen at port 8080 (default host is localhost).
You can run this, and point your browser at http://localhost:8080 to verify that it works as expected.
Here’s the 10000 foot view:
A Router is one of the core concepts of Vert.x-Web. It’s an object which maintains zero or more
Routes .
A router takes an HTTP request and finds the first matching route for that request, and passes the request to that route.
The route can have a handler associated with it, which then receives the request. You then do something with the request, and then, either end it or pass it to the next matching handler.
Here’s a simple router example:
def server = vertx.createHttpServer()
def router = Router.router(vertx)
router.route().handler({ routingContext ->
// This handler will be called for every request
def response = routingContext.response()
response.putHeader("content-type", "text/plain")
// Write to the response and end it
response.end("Hello World from Vert.x-Web!")
})
server.requestHandler(router).listen(8080)It basically does the same thing as the Vert.x Core HTTP server hello world example from the previous section, but this time using Vert.x-Web.
We create an HTTP server as before, then we create a router. Once we’ve done that we create a simple route with no matching criteria so it will match all requests that arrive on the server.
We then specify a handler for that route. That handler will be called for all requests that arrive on the server.
The object that gets passed into the handler is a RoutingContext - this contains
the standard Vert.x HttpServerRequest and HttpServerResponse
but also various other useful stuff that makes working with Vert.x-Web simpler.
For every request that is routed there is a unique routing context instance, and the same instance is passed to all handlers for that request.
Once we’ve set up the handler, we set the request handler of the HTTP server to pass all incoming requests
to handle.
So, that’s the basics. Now we’ll look at things in more detail:
When Vert.x-Web decides to route a request to a matching route, it calls the handler of the route passing in an instance
of RoutingContext. A route can have different handlers, that you can append using
handler
If you don’t end the response in your handler, you should call next so another
matching route can handle the request (if any).
You don’t have to call next before the handler has finished executing.
You can do this some time later, if you want:
def route = router.route("/some/path/")
route.handler({ routingContext ->
def response = routingContext.response()
// enable chunked responses because we will be adding data as
// we execute over other handlers. This is only required once and
// only if several handlers do output.
response.setChunked(true)
response.write("route1\n")
// Call the next matching route after a 5 second delay
routingContext.vertx().setTimer(5000, { tid ->
routingContext.next()
})
})
route.handler({ routingContext ->
def response = routingContext.response()
response.write("route2\n")
// Call the next matching route after a 5 second delay
routingContext.vertx().setTimer(5000, { tid ->
routingContext.next()
})
})
route.handler({ routingContext ->
def response = routingContext.response()
response.write("route3")
// Now end the response
routingContext.response().end()
})In the above example route1 is written to the response, then 5 seconds later route2 is written to the response,
then 5 seconds later route3 is written to the response and the response is ended.
Note, all this happens without any thread blocking.
Sometimes, you might have to do something in a handler that might block the event loop for some time, e.g. call a legacy blocking API or do some intensive calculation.
You can’t do that in a normal handler, so we provide the ability to set blocking handlers on a route.
A blocking handler looks just like a normal handler but it’s called by Vert.x using a thread from the worker pool not using an event loop.
You set a blocking handler on a route with blockingHandler.
Here’s an example:
router.route().blockingHandler({ routingContext ->
// Do something that might take some time synchronously
service.doSomethingThatBlocks()
// Now call the next handler
routingContext.next()
})By default, any blocking handlers executed on the same context (e.g. the same verticle instance) are ordered - this
means the next one won’t be executed until the previous one has completed. If you don’t care about orderering and
don’t mind your blocking handlers executing in parallel you can set the blocking handler specifying ordered as
false using blockingHandler.
Note, if you need to process multipart form data from a blocking handler, you MUST use a non-blocking handler
FIRST in order to call setExpectMultipart(true). Here is an example:
router.post("/some/endpoint").handler({ ctx ->
ctx.request().setExpectMultipart(true)
ctx.next()
}).blockingHandler({ ctx ->
// ... Do some blocking operation
})A route can be set-up to match the path from the request URI. In this case it will match any request which has a path that’s the same as the specified path.
In the following example the handler will be called for a request /some/path/. We also ignore trailing slashes
so it will be called for paths /some/path and /some/path// too:
def route = router.route().path("/some/path/")
route.handler({ routingContext ->
// This handler will be called for the following request paths:
// `/some/path`
// `/some/path/`
// `/some/path//`
//
// but not:
// `/some/path/subdir`
})Often you want to route all requests that begin with a certain path. You could use a regex to do this, but a simply
way is to use an asterisk * at the end of the path when declaring the route path.
In the following example the handler will be called for any request with a URI path that starts with
/some/path/.
For example /some/path/foo.html and /some/path/otherdir/blah.css would both match.
def route = router.route().path("/some/path/*")
route.handler({ routingContext ->
// This handler will be called for any path that starts with
// `/some/path/`, e.g.
// `/some/path`
// `/some/path/`
// `/some/path/subdir`
// `/some/path/subdir/blah.html`
//
// but not:
// `/some/bath`
})With any path it can also be specified when creating the route:
def route = router.route("/some/path/*")
route.handler({ routingContext ->
// This handler will be called same as previous example
})It’s possible to match paths using placeholders for parameters which are then available in the request
params.
Here’s an example
def route = router.route(HttpMethod.POST, "/catalogue/products/:producttype/:productid/")
route.handler({ routingContext ->
def productType = routingContext.request().getParam("producttype")
def productID = routingContext.request().getParam("productid")
// Do something with them...
})The placeholders consist of : followed by the parameter name. Parameter names consist of any alphabetic character,
numeric character or underscore.
In the above example, if a POST request is made to path: /catalogue/products/tools/drill123/ then the route will match
and productType will receive the value tools and productID will receive the value drill123.
Regular expressions can also be used to match URI paths in routes.
// Matches any path ending with 'foo'
def route = router.route().pathRegex(".*foo")
route.handler({ routingContext ->
// This handler will be called for:
// /some/path/foo
// /foo
// /foo/bar/wibble/foo
// /bar/foo
// But not:
// /bar/wibble
})Alternatively the regex can be specified when creating the route:
def route = router.routeWithRegex(".*foo")
route.handler({ routingContext ->
// This handler will be called same as previous example
})You can also capture path parameters when using regular expressions, here’s an example:
def route = router.routeWithRegex(".*foo")
// This regular expression matches paths that start with something like:
// "/foo/bar" - where the "foo" is captured into param0 and the "bar" is captured into
// param1
route.pathRegex("\\/([^\\/]+)\\/([^\\/]+)").handler({ routingContext ->
def productType = routingContext.request().getParam("param0")
def productID = routingContext.request().getParam("param1")
// Do something with them...
})In the above example, if a request is made to path: /tools/drill123/ then the route will match
and productType will receive the value tools and productID will receive the value drill123.
Captures are denoted in regular expressions with capture groups (i.e. surrounding the capture with round brackets)
Using int index param names might be troublesome in some cases. It’s possible to use named capture groups in the regex path.
[source,groovy]
// This regular expression matches paths that start with something like: "/foo/bar"
// It uses named regex groups to capture path params
def route = router.routeWithRegex("\\/(?<productType>[^\\/]+)\\/(?<productId>[^\\/]+)").handler({ routingContext ->
def productType = routingContext.request().getParam("productType")
def productID = routingContext.request().getParam("productId")
// Do something with them...
})
In the example above, named capture groups are mapped to path parameters of the same name as the group.
Additionally, you can still access group parameters as you would with normal groups (i.e. params0, params1…)
By default a route will match all HTTP methods.
If you want a route to only match for a specific HTTP method you can use method
def route = router.route().method(HttpMethod.POST)
route.handler({ routingContext ->
// This handler will be called for any POST request
})Or you can specify this with a path when creating the route:
def route = router.route(HttpMethod.POST, "/some/path/")
route.handler({ routingContext ->
// This handler will be called for any POST request to a URI path starting with /some/path/
})If you want to route for a specific HTTP method you can also use the methods such as get,
post and put named after the HTTP
method name. For example:
router.get().handler({ routingContext ->
// Will be called for any GET request
})
router.get("/some/path/").handler({ routingContext ->
// Will be called for any GET request to a path
// starting with /some/path
})
router.getWithRegex(".*foo").handler({ routingContext ->
// Will be called for any GET request to a path
// ending with `foo`
})
// There are also equivalents to the above for PUT, POST, DELETE, HEAD and OPTIONSIf you want to specify a route will match for more than HTTP method you can call method
multiple times:
def route = router.route().method(HttpMethod.POST).method(HttpMethod.PUT)
route.handler({ routingContext ->
// This handler will be called for any POST or PUT request
})By default routes are matched in the order they are added to the router.
When a request arrives the router will step through each route and check if it matches, if it matches then the handler for that route will be called.
If the handler subsequently calls next the handler for the next
matching route (if any) will be called. And so on.
Here’s an example to illustrate this:
def route1 = router.route("/some/path/").handler({ routingContext ->
def response = routingContext.response()
// enable chunked responses because we will be adding data as
// we execute over other handlers. This is only required once and
// only if several handlers do output.
response.setChunked(true)
response.write("route1\n")
// Now call the next matching route
routingContext.next()
})
def route2 = router.route("/some/path/").handler({ routingContext ->
def response = routingContext.response()
response.write("route2\n")
// Now call the next matching route
routingContext.next()
})
def route3 = router.route("/some/path/").handler({ routingContext ->
def response = routingContext.response()
response.write("route3")
// Now end the response
routingContext.response().end()
})In the above example the response will contain:
route1 route2 route3
As the routes have been called in that order for any request that starts with /some/path.
If you want to override the default ordering for routes, you can do so using order,
specifying an integer value.
Routes are assigned an order at creation time corresponding to the order in which they were added to the router, with
the first route numbered 0, the second route numbered 1, and so on.
By specifying an order for the route you can override the default ordering. Order can also be negative, e.g. if you
want to ensure a route is evaluated before route number 0.
Let’s change the ordering of route2 so it runs before route1:
def route1 = router.route("/some/path/").handler({ routingContext ->
def response = routingContext.response()
response.write("route1\n")
// Now call the next matching route
routingContext.next()
})
def route2 = router.route("/some/path/").handler({ routingContext ->
def response = routingContext.response()
// enable chunked responses because we will be adding data as
// we execute over other handlers. This is only required once and
// only if several handlers do output.
response.setChunked(true)
response.write("route2\n")
// Now call the next matching route
routingContext.next()
})
def route3 = router.route("/some/path/").handler({ routingContext ->
def response = routingContext.response()
response.write("route3")
// Now end the response
routingContext.response().end()
})
// Change the order of route2 so it runs before route1
route2.order(-1)then the response will now contain:
route2 route1 route3
If two matching routes have the same value of order, then they will be called in the order they were added.
You can also specify that a route is handled last, with last
You can specify that a route will match against matching request MIME types using consumes.
In this case, the request will contain a content-type header specifying the MIME type of the request body.
This will be matched against the value specified in consumes.
Basically, consumes is describing which MIME types the handler can consume.
Matching can be done on exact MIME type matches:
// Exact match
router.route().consumes("text/html").handler({ routingContext ->
// This handler will be called for any request with
// content-type header set to `text/html`
})Multiple exact matches can also be specified:
// Multiple exact matches
router.route().consumes("text/html").consumes("text/plain").handler({ routingContext ->
// This handler will be called for any request with
// content-type header set to `text/html` or `text/plain`.
})Matching on wildcards for the sub-type is supported:
// Sub-type wildcard match
router.route().consumes("text/*").handler({ routingContext ->
// This handler will be called for any request with top level type `text`
// e.g. content-type header set to `text/html` or `text/plain` will both match
})And you can also match on the top level type
// Top level type wildcard match
router.route().consumes("*/json").handler({ routingContext ->
// This handler will be called for any request with sub-type json
// e.g. content-type header set to `text/json` or `application/json` will both match
})If you don’t specify a / in the consumers, it will assume you meant the sub-type.
The HTTP accept header is used to signify which MIME types of the response are acceptable to the client.
An accept header can have multiple MIME types separated by ‘,’.
MIME types can also have a q value appended to them* which signifies a weighting to apply if more than one
response MIME type is available matching the accept header. The q value is a number between 0 and 1.0.
If omitted it defaults to 1.0.
For example, the following accept header signifies the client will accept a MIME type of only text/plain:
Accept: text/plain
With the following the client will accept text/plain or text/html with no preference.
Accept: text/plain, text/html
With the following the client will accept text/plain or text/html but prefers text/html as it has a higher
q value (the default value is q=1.0)
Accept: text/plain; q=0.9, text/html
If the server can provide both text/plain and text/html it should provide the text/html in this case.
By using produces you define which MIME type(s) the route produces, e.g. the
following handler produces a response with MIME type application/json.
router.route().produces("application/json").handler({ routingContext ->
def response = routingContext.response()
response.putHeader("content-type", "application/json")
response.write(someJSON).end()
})In this case the route will match with any request with an accept header that matches application/json.
Here are some examples of accept headers that will match:
Accept: application/json Accept: application/* Accept: application/json, text/html Accept: application/json;q=0.7, text/html;q=0.8, text/plain
You can also mark your route as producing more than one MIME type. If this is the case, then you use
getAcceptableContentType to find out the actual MIME type that
was accepted.
// This route can produce two different MIME types
router.route().produces("application/json").produces("text/html").handler({ routingContext ->
def response = routingContext.response()
// Get the actual MIME type acceptable
def acceptableContentType = routingContext.getAcceptableContentType()
response.putHeader("content-type", acceptableContentType)
response.write(whatever).end()
})In the above example, if you sent a request with the following accept header:
Accept: application/json; q=0.7, text/html
Then the route would match and acceptableContentType would contain text/html as both are
acceptable but that has a higher q value.
You can combine all the above routing criteria in many different ways, for example:
def route = router.route(HttpMethod.PUT, "myapi/orders").consumes("application/json").produces("application/json")
route.handler({ routingContext ->
// This would be match for any PUT method to paths starting with "myapi/orders" with a
// content-type of "application/json"
// and an accept header matching "application/json"
})You can use the context data in the RoutingContext to maintain any data that you
want to share between handlers for the lifetime of the request.
Here’s an example where one handler sets some data in the context data and a subsequent handler retrieves it:
A request sent to path /some/path/other will match both routes.
router.get("/some/path").handler({ routingContext ->
routingContext.put("foo", "bar")
routingContext.next()
})
router.get("/some/path/other").handler({ routingContext ->
def bar = routingContext.get("foo")
// Do something with bar
routingContext.response().end()
})Until now all routing mechanism allow you to handle your requests in a sequential way, however there might be times where you will want to go back. Since the context does not expose any information about the previous or next handler, mostly because this information is dynamic there is a way to restart the whole routing from the start of the current Router.
router.get("/some/path").handler({ routingContext ->
routingContext.put("foo", "bar")
routingContext.next()
})
router.get("/some/path/B").handler({ routingContext ->
routingContext.response().end()
})
router.get("/some/path").handler({ routingContext ->
routingContext.reroute("/some/path/B")
})So from the code you can see that if a request arrives at /some/path if first add a value to the context, then
moves to the next handler that re routes the request to /some/path/B which terminates the request.
You can reroute based on a new path or based on a new path and method. Note however that rerouting based on method might introduce security issues since for example a usually safe GET request can become a DELETE.
Reroute is also allowed on the failure handler, however due to the nature of re router when called the current status code and failure reason are reset. In order the rerouted handler should generate the correct status code if needed, for example:
router.get("/my-pretty-notfound-handler").handler({ ctx ->
ctx.response().setStatusCode(404).end("NOT FOUND fancy html here!!!")
})
router.get().failureHandler({ ctx ->
if (ctx.statusCode() == 404) {
ctx.reroute("/my-pretty-notfound-handler")
} else {
ctx.next()
}
})It should be clear that reroute works on paths, so if you need to preserve and or add state across reroutes, one
should use the RoutingContext object. For example you want to reroute to a new path with a extra parameter:
router.get("/final-target").handler({ ctx ->
// continue from here...
})
// THE WRONG WAY! (Will reroute to /final-target excluding the query string)
router.get().handler({ ctx ->
ctx.reroute("/final-target?variable=value")
})
// THE CORRECT WAY!
router.get().handler({ ctx ->
ctx.put("variable", "value").reroute("/final-target")
})Even though the wrong reroute path will warn you that the query string is ignored, the reroute will happen since the implementation will strip any query string or html fragment from the path.
Sometimes if you have a lot of handlers it can make sense to split them up into multiple routers. This is also useful if you want to reuse a set of handlers in a different application, rooted at a different path root.
To do this you can mount a router at a mount point in another router. The router that is mounted is called a sub-router. Sub routers can mount other sub routers so you can have several levels of sub-routers if you like.
Let’s look at a simple example of a sub-router mounted with another router.
This sub-router will maintain the set of handlers that corresponds to a simple fictional REST API. We will mount that on another router. The full implementation of the REST API is not shown.
Here’s the sub-router:
def restAPI = Router.router(vertx)
restAPI.get("/products/:productID").handler({ rc ->
// TODO Handle the lookup of the product....
rc.response().write(productJSON)
})
restAPI.put("/products/:productID").handler({ rc ->
// TODO Add a new product...
rc.response().end()
})
restAPI.delete("/products/:productID").handler({ rc ->
// TODO delete the product...
rc.response().end()
})If this router was used as a top level router, then GET/PUT/DELETE requests to urls like /products/product1234
would invoke the API.
However, let’s say we already have a web-site as described by another router:
def mainRouter = Router.router(vertx)
// Handle static resources
mainRouter.route("/static/*").handler(myStaticHandler)
mainRouter.route(".*\\.templ").handler(myTemplateHandler)We can now mount the sub router on the main router, against a mount point, in this case /productsAPI
mainRouter.mountSubRouter("/productsAPI", restAPI)This means the REST API is now accessible via paths like: /productsAPI/products/product1234
Vert.x Web parses the Accept-Language header and provides some helper methods to identify which is the preferred
locale for a client or the sorted list of preferred locales by quality.
def route = router.get("/localized").handler({ rc ->
// although it might seem strange by running a loop with a switch we
// make sure that the locale order of preference is preserved when
// replying in the users language.
rc.acceptableLanguages().each { language ->
return
}
// we do not know the user language so lets just inform that back:
rc.response().end("Sorry we don't speak: ${rc.preferredLanguage()}")
})The main method acceptableLocales will return the ordered list of locales the
user understands, if you’re only interested in the user prefered locale then the helper:
preferredLocale will return the 1st element of the list or null if no
locale was provided by the user.
If no routes match for any particular request, Vert.x-Web will signal a 404 error.
This can then be handled by your own error handler, or perhaps the augmented error handler that we supply to use, or if no error handler is provided Vert.x-Web will send back a basic 404 (Not Found) response.
As well as setting handlers to handle requests you can also set handlers to handle failures in routing.
Failure handlers are used with the exact same route matching criteria that you use with normal handlers.
For example you can provide a failure handler that will only handle failures on certain paths, or for certain HTTP methods.
This allows you to set different failure handlers for different parts of your application.
Here’s an example failure handler that will only be called for failure that occur when routing to GET requests
to paths that start with /somepath/:
def route = router.get("/somepath/*")
route.failureHandler({ frc ->
// This will be called for failures that occur
// when routing requests to paths starting with
// '/somepath/'
})Failure routing will occur if a handler throws an exception, or if a handler calls
fail specifying an HTTP status code to deliberately signal a failure.
If an exception is caught from a handler this will result in a failure with status code 500 being signalled.
When handling the failure, the failure handler is passed the routing context which also allows the failure or failure code to be retrieved so the failure handler can use that to generate a failure response.
def route1 = router.get("/somepath/path1/")
route1.handler({ routingContext ->
// Let's say this throws a RuntimeException
throw new java.lang.RuntimeException("something happened!")
})
def route2 = router.get("/somepath/path2")
route2.handler({ routingContext ->
// This one deliberately fails the request passing in the status code
// E.g. 403 - Forbidden
routingContext.fail(403)
})
// Define a failure handler
// This will get called for any failures in the above handlers
def route3 = router.get("/somepath/*")
route3.failureHandler({ failureRoutingContext ->
def statusCode = failureRoutingContext.statusCode()
// Status code will be 500 for the RuntimeException or 403 for the other failure
def response = failureRoutingContext.response()
response.setStatusCode(statusCode).end("Sorry! Not today")
})For the eventuality that an error occurs when running the error handler related usage of not allowed characters in status message header, then the original status message will be changed to the default message from the error code. This is a tradeoff to keep the semantics of the HTTP protocol working instead of abruptly creash and close the socket without properly completing the protocol.
The BodyHandler allows you to retrieve request bodies, limit body sizes and handle
file uploads.
You should make sure a body handler is on a matching route for any requests that require this functionality.
The usage of this handler requires that it is installed as soon as possible in the router since it needs to install handlers to consume the HTTP request body and this must be done before executing any async call.
// This body handler will be called for all routes
router.route().handler(BodyHandler.create())If you know the request body is JSON, then you can use getBodyAsJson,
if you know it’s a string you can use getBodyAsString, or to
retrieve it as a buffer use getBody.
To limit the size of a request body, create the body handler then use setBodyLimit
to specifying the maximum body size, in bytes. This is useful to avoid running out of memory with very large bodies.
If an attempt to send a body greater than the maximum size is made, an HTTP status code of 413 - Request Entity Too Large,
will be sent.
There is no body limit by default.
By default, the body handler will merge any form attributes into the request parameters. If you don’t want this behaviour
you can use disable it with setMergeFormAttributes.
Body handler is also used to handle multi-part file uploads.
If a body handler is on a matching route for the request, any file uploads will be automatically streamed to the
uploads directory, which is file-uploads by default.
Each file will be given an automatically generated file name, and the file uploads will be available on the routing
context with fileUploads.
Here’s an example:
router.route().handler(BodyHandler.create())
router.post("/some/path/uploads").handler({ routingContext ->
def uploads = routingContext.fileUploads()
// Do something with uploads....
})Each file upload is described by a FileUpload instance, which allows various properties
such as the name, file-name and size to be accessed.
Vert.x-Web has cookies support using the CookieHandler.
You should make sure a cookie handler is on a matching route for any requests that require this functionality.
// This cookie handler will be called for all routes
router.route().handler(CookieHandler.create())To remove a cookie, use removeCookie.
To add a cookie use addCookie.
The set of cookies will be written back in the response automatically when the response headers are written so the browser can store them.
Cookies are described by instances of Cookie. This allows you to retrieve the name,
value, domain, path and other normal cookie properties.
Here’s an example of querying and adding cookies:
// This cookie handler will be called for all routes
router.route().handler(CookieHandler.create())
router.route("some/path/").handler({ routingContext ->
def someCookie = routingContext.getCookie("mycookie")
def cookieValue = someCookie.getValue()
// Do something with cookie...
// Add a cookie - this will get written back in the response automatically
routingContext.addCookie(Cookie.cookie("othercookie", "somevalue"))
})Vert.x-Web provides out of the box support for sessions.
Sessions last between HTTP requests for the length of a browser session and give you a place where you can add session-scope information, such as a shopping basket.
Vert.x-Web uses session cookies to identify a session. The session cookie is temporary and will be deleted by your browser when it’s closed.
We don’t put the actual data of your session in the session cookie - the cookie simply uses an identifier to look-up the actual session on the server. The identifier is a random UUID generated using a secure random, so it should be effectively unguessable.
Cookies are passed across the wire in HTTP requests and responses so it’s always wise to make sure you are using HTTPS when sessions are being used. Vert.x will warn you if you attempt to use sessions over straight HTTP.
To enable sessions in your application you must have a SessionHandler
on a matching route before your application logic.
The session handler handles the creation of session cookies and the lookup of the session so you don’t have to do that yourself.
To create a session handler you need to have a session store instance. The session store is the object that holds the actual sessions for your application.
The session store is responsible for holding a secure pseudo random number generator in order to guarantee secure session ids. This PRNG is independent of the store which means that given a session id from store A one cannot derive the session id of store B since they have different seeds and states.
By default this PRNG uses a mixed mode, blocking for seeding, non blocking for generating. The PRNG will also reseed every 5 minutes with 64bits of new entropy. However this can all be configured using the system properties:
io.vertx.ext.auth.prng.algorithm e.g.: SHA1PRNG
io.vertx.ext.auth.prng.seed.interval e.g.: 1000 (every second)
io.vertx.ext.auth.prng.seed.bits e.g.: 128
Most users should not need to configure these values unless if you notice that the performance of your application is being affected by the PRNG algorithm.
Vert.x-Web comes with two session store implementations out of the box, and you can also write your own if you prefer.
The implementations are expected to follow the ServiceLoader conventions and all stores that are available at runtime
from the classpath will be exposed. When more than 1 implementations are available the first one that can be
instantiated and configured with success becomes the default. If none is available, then the default depends on the mode
Vert.x was created. If cluster mode is available the the clustered session store is the default otherwise the local
storage is the default.
With this store, sessions are stored locally in memory and only available in this instance.
This store is appropriate if you have just a single Vert.x instance of you are using sticky sessions in your application and have configured your load balancer to always route HTTP requests to the same Vert.x instance.
If you can’t ensure your requests will all terminate on the same server then don’t use this store as your requests might end up on a server which doesn’t know about your session.
Local session stores are implemented by using a shared local map, and have a reaper which clears out expired sessions.
The reaper interval can be configured with a json message with the key: reaperInterval.
Here are some examples of creating a local SessionStore
// Create a local session store using defaults
def store1 = LocalSessionStore.create(vertx)
// Create a local session store specifying the local shared map name to use
// This might be useful if you have more than one application in the same
// Vert.x instance and want to use different maps for different applications
def store2 = LocalSessionStore.create(vertx, "myapp3.sessionmap")
// Create a local session store specifying the local shared map name to use and
// setting the reaper interval for expired sessions to 10 seconds
def store3 = LocalSessionStore.create(vertx, "myapp3.sessionmap", 10000)With this store, sessions are stored in a distributed map which is accessible across the Vert.x cluster.
This store is appropriate if you’re not using sticky sessions, i.e. your load balancer is distributing different requests from the same browser to different servers.
Your session is accessible from any node in the cluster using this store.
To you use a clustered session store you should make sure your Vert.x instance is clustered.
Here are some examples of creating a clustered SessionStore
// a clustered Vert.x
Vertx.clusteredVertx([
clustered:true
], { res ->
def vertx = res.result()
// Create a clustered session store using defaults
def store1 = ClusteredSessionStore.create(vertx)
// Create a clustered session store specifying the distributed map name to use
// This might be useful if you have more than one application in the cluster
// and want to use different maps for different applications
def store2 = ClusteredSessionStore.create(vertx, "myclusteredapp3.sessionmap")
})Once you’ve created a session store you can create a session handler, and add it to a route. You should make sure your session handler is routed to before your application handlers.
You’ll also need to include a CookieHandler as the session handler uses cookies to
lookup the session. The cookie handler should be before the session handler when routing.
Here’s an example:
def router = Router.router(vertx)
// We need a cookie handler first
router.route().handler(CookieHandler.create())
// Create a clustered session store using defaults
def store = ClusteredSessionStore.create(vertx)
def sessionHandler = SessionHandler.create(store)
// Make sure all requests are routed through the session handler too
router.route().handler(sessionHandler)
// Now your application handlers
router.route("/somepath/blah/").handler({ routingContext ->
def session = routingContext.session()
session.put("foo", "bar")
// etc
})The session handler will ensure that your session is automatically looked up (or created if no session exists) from the session store and set on the routing context before it gets to your application handlers.
In your handlers you can access the session instance with session.
You put data into the session with put,
you get data from the session with get, and you remove
data from the session with remove.
The keys for items in the session are always strings. The values can be any type for a local session store, and for
a clustered session store they can be any basic type, or Buffer, JsonObject,
JsonArray or a serializable object, as the values have to serialized across the cluster.
Here’s an example of manipulating session data:
router.route().handler(CookieHandler.create())
router.route().handler(sessionHandler)
// Now your application handlers
router.route("/somepath/blah").handler({ routingContext ->
def session = routingContext.session()
// Put some data from the session
session.put("foo", "bar")
// Retrieve some data from a session
def age = session.get("age")
// Remove some data from a session
def obj = session.remove("myobj")
})Sessions are automatically written back to the store after after responses are complete.
You can manually destroy a session using destroy. This will remove the session
from the context and the session store. Note that if there is no session a new one will be automatically created
for the next request from the browser that’s routed through the session handler.
Sessions will be automatically timed out if they are not accessed for a time greater than the timeout period. When a session is timed out, it is removed from the store.
Sessions are automatically marked as accessed when a request arrives and the session is looked up and and when the response is complete and the session is stored back in the store.
You can also use setAccessed to manually mark a session as accessed.
The session timeout can be configured when creating the session handler. Default timeout is 30 minutes.
Vert.x comes with some out-of-the-box handlers for handling both authentication and authorisation.
To create an auth handler you need an instance of AuthProvider. Auth provider is
used for authentication and authorisation of users. Vert.x provides several auth provider instances out of the box
in the vertx-auth project. For full information on auth providers and how to use and configure them
please consult the auth documentation.
Here’s a simple example of creating a basic auth handler given an auth provider.
router.route().handler(CookieHandler.create())
router.route().handler(SessionHandler.create(LocalSessionStore.create(vertx)))
def basicAuthHandler = BasicAuthHandler.create(authProvider)Let’s say you want all requests to paths that start with /private/ to be subject to auth. To do that you make sure
your auth handler is before your application handlers on those paths:
router.route().handler(CookieHandler.create())
router.route().handler(SessionHandler.create(LocalSessionStore.create(vertx)))
router.route().handler(UserSessionHandler.create(authProvider))
def basicAuthHandler = BasicAuthHandler.create(authProvider)
// All requests to paths starting with '/private/' will be protected
router.route("/private/*").handler(basicAuthHandler)
router.route("/someotherpath").handler({ routingContext ->
// This will be public access - no login required
})
router.route("/private/somepath").handler({ routingContext ->
// This will require a login
// This will have the value true
def isAuthenticated = routingContext.user() != null
})If the auth handler has successfully authenticated and authorised the user it will inject a User
object into the RoutingContext so it’s available in your handlers with:
user.
If you want your User object to be stored in the session so it’s available between requests so you don’t have to authenticate on each request, then you should make sure you have a session handler and a user session handler on matching routes before the auth handler.
Once you have your user object you can also programmatically use the methods on it to authorise the user.
If you want to cause the user to be logged out you can call clearUser
on the routing context.
HTTP Basic Authentication is a simple means of authentication that can be appropriate for simple applications.
With basic auth, credentials are sent unencrypted across the wire in HTTP headers so it’s essential that you serve your application using HTTPS not HTTP.
With basic auth, if a user requests a resource that requires authorisation, the basic auth handler will send back
a 401 response with the header WWW-Authenticate set. This prompts the browser to show a log-in dialogue and
prompt the user to enter their username and password.
The request is made to the resource again, this time with the Authorization header set, containing the username
and password encoded in Base64.
When the basic auth handler receives this information, it calls the configured AuthProvider
with the username and password to authenticate the user. If the authentication is successful the handler attempts
to authorise the user. If that is successful then the routing of the request is allowed to continue to the application
handlers, otherwise a 403 response is returned to signify that access is denied.
The auth handler can be set-up with a set of authorities that are required for access to the resources to be granted.
With redirect auth handling the user is redirected to towards a login page in the case they are trying to access a protected resource and they are not logged in.
The user then fills in the login form and submits it. This is handled by the server which authenticates the user and, if authenticated redirects the user back to the original resource.
To use redirect auth you configure an instance of RedirectAuthHandler instead of a
basic auth handler.
You will also need to setup handlers to serve your actual login page, and a handler to handle the actual login itself.
To handle the login we provide a prebuilt handler FormLoginHandler for the purpose.
Here’s an example of a simple app, using a redirect auth handler on the default redirect url /loginpage.
router.route().handler(CookieHandler.create())
router.route().handler(SessionHandler.create(LocalSessionStore.create(vertx)))
router.route().handler(UserSessionHandler.create(authProvider))
def redirectAuthHandler = RedirectAuthHandler.create(authProvider)
// All requests to paths starting with '/private/' will be protected
router.route("/private/*").handler(redirectAuthHandler)
// Handle the actual login
// One of your pages must POST form login data
router.post("/login").handler(FormLoginHandler.create(authProvider))
// Set a static server to serve static resources, e.g. the login page
router.route().handler(StaticHandler.create())
router.route("/someotherpath").handler({ routingContext ->
// This will be public access - no login required
})
router.route("/private/somepath").handler({ routingContext ->
// This will require a login
// This will have the value true
def isAuthenticated = routingContext.user() != null
})With JWT authorisation resources can be protected by means of permissions and users without enough rights are denied access.
To use this handler there are 2 steps involved:
Setup an handler to issue tokens (or rely on a 3rd party)
Setup the handler to filter the requests
Please note that these 2 handlers should be only available on HTTPS, not doing so allows sniffing the tokens in transit which leads to session hijacking attacks.
Here’s an example on how to issue tokens:
def router = Router.router(vertx)
def authConfig = [
keyStore:[
type:"jceks",
path:"keystore.jceks",
password:"secret"
]
]
def authProvider = JWTAuth.create(vertx, authConfig)
router.route("/login").handler({ ctx ->
// this is an example, authentication should be done with another provider...
if ("paulo" == ctx.request().getParam("username") && "secret" == ctx.request().getParam("password")) {
ctx.response().end(authProvider.generateToken([
sub:"paulo"
], [:]))
} else {
ctx.fail(401)
}
})Now that your client has a token all it is required is that forall* consequent request the HTTP header
Authorization is filled with: Bearer <token> e.g.:
def router = Router.router(vertx)
def authConfig = [
keyStore:[
type:"jceks",
path:"keystore.jceks",
password:"secret"
]
]
def authProvider = JWTAuth.create(vertx, authConfig)
router.route("/protected/*").handler(JWTAuthHandler.create(authProvider))
router.route("/protected/somepage").handler({ ctx ->
// some handle code...
})JWT allows you to add any information you like to the token itself. By doing this there is no state in the server which allows you to scale your applications without need for clustered session data. In order to add data to the token, during the creation of the token just add data to the JsonObject parameter:
def authConfig = [
keyStore:[
type:"jceks",
path:"keystore.jceks",
password:"secret"
]
]
def authProvider = JWTAuth.create(vertx, authConfig)
authProvider.generateToken([
sub:"paulo",
someKey:"some value"
], [:])And the same when consuming:
def handler = { rc ->
def theSubject = rc.user().principal().sub
def someKey = rc.user().principal().someKey
}With any auth handler you can also configure required authorities to access the resource.
By default, if no authorities are configured then it is sufficient to be logged in to access the resource, otherwise the user must be both logged in (authenticated) and have the required authorities.
Here’s an example of configuring an app so that different authorities are required for different parts of the app. Note that the meaning of the authorities is determined by the underlying auth provider that you use. E.g. some may support a role/permission based model but others might use another model.
def listProductsAuthHandler = RedirectAuthHandler.create(authProvider)
listProductsAuthHandler.addAuthority("list_products")
// Need "list_products" authority to list products
router.route("/listproducts/*").handler(listProductsAuthHandler)
def settingsAuthHandler = RedirectAuthHandler.create(authProvider)
settingsAuthHandler.addAuthority("role:admin")
// Only "admin" has access to /private/settings
router.route("/private/settings/*").handler(settingsAuthHandler)There are times when you want to support multiple authN/authZ mechanisms in a single application. For this you can
use the ChainAuthHandler. The chain auth handler will attempt to perform
authentication on a chain of handlers. The chain works both for AuthN and AuthZ, so if the authentication is valid
at a given handler of the chain, then that same handler will be used to perform authorization (if requested).
It is important to know that some handlers require specific providers, for example:
The JWTAuthHandler requires JWTAuth.
The DigestAuthHandler requires HtdigestAuth.
The OAuth2AuthHandler requires OAuth2Auth.
So it is not expected that the providers will be shared across all handlers. There are cases where one can share the provider across handlers, for example:
The BasicAuthHandler can take any provider.
The RedirectAuthHandler can take any provider.
So say that you want to create an application that accepts both HTTP Basic Authentication and Form Redirect. You
would start configuring your chain as:
def chain = ChainAuthHandler.create()
// add http basic auth handler to the chain
chain.append(BasicAuthHandler.create(provider))
// add form redirect auth handler to the chain
chain.append(RedirectAuthHandler.create(provider))
// secure your route
router.route("/secure/resource").handler(chain)
// your app
router.route("/secure/resource").handler({ ctx ->
// do something...
})So when a user makes a request without a Authorization header, this means that the chain will fail to authenticate
with the basic auth handler and will attempt to authenticate with the redirect handler. Since the redirect handler
always redirects you will be sent to the login form that you configured in that handler.
Like the normal routing in vertx-web, auth chaning is a sequence, so if you would prefer to fallback to your browser asking for the user credentials using HTTP Basic authentication instead of the redirect all you need to to is reverse the order of appending to the chain.
Now assume that you make a request where you provide the header Authorization with the value Basic [token]. In
this case the basic auth handler will attempt to authenticate and if it is sucessful the chain will stop and
vertx-web will continue to process your handlers. If the token is not valid, for example bad username/password, then
the chain will continue to the following entry. In this specific case the redirect auth handler.
Vert.x-Web comes with an out of the box handler for serving static web resources so you can write static web servers very easily.
To serve static resources such as .html, .css, .js or any other static resource, you use an instance of
StaticHandler.
Any requests to paths handled by the static handler will result in files being served from a directory on the file system
or from the classpath. The default static file directory is webroot but this can be configured.
In the following example all requests to paths starting with /static/ will get served from the directory webroot:
router.route("/static/*").handler(StaticHandler.create())For example, if there was a request with path /static/css/mystyles.css the static serve will look for a file in the
directory webroot/css/mystyle.css.
It will also look for a file on the classpath called webroot/css/mystyle.css. This means you can package up all your
static resources into a jar file (or fatjar) and distribute them like that.
When Vert.x finds a resource on the classpath for the first time it extracts it and caches it in a temporary directory on disk so it doesn’t have to do this each time.
The handler will handle range aware requests. When a client makes a request to a static resource, the handler will
notify that it can handle range aware request by stating the unit on the Accept-Ranges header. Further requests
that contain the Range header with the correct unit and start and end indexes will then receive partial responses
with the correct Content-Range header.
By default the static handler will set cache headers to enable browsers to effectively cache files.
Vert.x-Web sets the headers cache-control,last-modified, and date.
cache-control is set to max-age=86400 by default. This corresponds to one day. This can be configured with
setMaxAgeSeconds if required.
If a browser sends a GET or a HEAD request with an if-modified-since header and the resource has not been modified
since that date, a 304 status is returned which tells the browser to use its locally cached resource.
If handling of cache headers is not required, it can be disabled with setCachingEnabled.
When cache handling is enabled Vert.x-Web will cache the last modified date of resources in memory, this avoids a disk hit to check the actual last modified date every time.
Entries in the cache have an expiry time, and after that time, the file on disk will be checked again and the cache entry updated.
If you know that your files never change on disk, then the cache entry will effectively never expire. This is the default.
If you know that your files might change on disk when the server is running then you can set files read only to false with
setFilesReadOnly.
To enable the maximum number of entries that can be cached in memory at any one time you can use
setMaxCacheSize.
To configure the expiry time of cache entries you can use setCacheEntryTimeout.
Any requests to the root path / will cause the index page to be served. By default the index page is index.html.
This can be configured with setIndexPage.
By default static resources will be served from the directory webroot. To configure this use
setWebRoot.
By default the serve will serve hidden files (files starting with .).
If you do not want hidden files to be served you can configure it with setIncludeHidden.
The server can also perform directory listing. By default directory listing is disabled. To enabled it use
setDirectoryListing.
When directory listing is enabled the content returned depends on the content type in the accept header.
For text/html directory listing, the template used to render the directory listing page can be configured with
setDirectoryTemplate.
By default, Vert.x will cache files that are served from the classpath into a file on disk in a sub-directory of a
directory called .vertx in the current working directory. This is mainly useful when deploying services as
fatjars in production where serving a file from the classpath every time can be slow.
In development this can cause a problem, as if you update your static content while the server is running, the cached file will be served not the updated file.
To disable file caching you can provide your vert.x options the property fileResolverCachingEnabled to false. For
backwards compatibility it will also default that value to the system property vertx.disableFileCaching. E.g. you
could set up a run configuration in your IDE to set this when running your main class.
Cross Origin Resource Sharing is a safe mechanism for allowing resources to be requested from one domain and served from another.
Vert.x-Web includes a handler CorsHandler that handles the CORS protocol for you.
Here’s an example:
// Will only accept GET requests from origin "vertx.io"
router.route().handler(CorsHandler.create("vertx\\.io").allowedMethod(HttpMethod.GET))
router.route().handler({ routingContext ->
// Your app handlers
})Vert.x-Web includes dynamic page generation capabilities by including out of the box support for several popular template engines. You can also easily add your own.
Template engines are described by TemplateEngine. In order to render a template
render is used.
The simplest way to use templates is not to call the template engine directly but to use the
TemplateHandler.
This handler calls the template engine for you based on the path in the HTTP request.
By default the template handler will look for templates in a directory called templates. This can be configured.
The handler will return the results of rendering with a content type of text/html by default. This can also be configured.
When you create the template handler you pass in an instance of the template engine you want. Template engines are not embedded in vertx-web so, you need to configure your project to access them. Configuration is provided for each template engine.
Here are some examples:
import io.vertx.groovy.ext.web.templ.HandlebarsTemplateEngine
import io.vertx.groovy.ext.web.handler.TemplateHandler
def engine = HandlebarsTemplateEngine.create()
def handler = TemplateHandler.create(engine)
// This will route all GET requests starting with /dynamic/ to the template handler
// E.g. /dynamic/graph.hbs will look for a template in /templates/graph.hbs
router.get("/dynamic/*").handler(handler)
// Route all GET requests for resource ending in .hbs to the template handler
router.getWithRegex(".+\\.hbs").handler(handler)To use MVEL, you need to add the following dependency to your project:
io.vertx:vertx-web-templ-mvel:3.6.2. Create an instance of the MVEL template engine using:
io.vertx.ext.web.templ.MVELTemplateEngine#create()
When using the MVEL template engine, it will by default look for
templates with the .templ extension if no extension is specified in the file name.
The routing context RoutingContext is available
in the MVEL template as the context variable, this means you can render the template based on anything in the context
including the request, response, session or context data.
Here are some examples:
The request path is @{context.request().path()}
The variable 'foo' from the session is @{context.session().get('foo')}
The value 'bar' from the context data is @{context.get('bar')}
Please consult the MVEL templates documentation for how to write MVEL templates.
To use the Jade template engine, you need to add the following dependency to your project:
io.vertx:vertx-web-templ-jade:3.6.2. Create an instance of the Jade template engine using:
io.vertx.ext.web.templ.JadeTemplateEngine#create().
When using the Jade template engine, it will by default look for
templates with the .jade extension if no extension is specified in the file name.
The routing context RoutingContext is available
in the Jade template as the context variable, this means you can render the template based on anything in the context
including the request, response, session or context data.
Here are some examples:
!!! 5
html
head
title= context.get('foo') + context.request().path()
body
Please consult the Jade4j documentation for how to write Jade templates.
To use Handlebars, you need to add the following dependency to your project:
io.vertx:vertx-web-templ-handlebars:3.6.2. Create an instance of the Handlebars template engine
using: io.vertx.ext.web.templ.HandlebarsTemplateEngine#create().
When using the Handlebars template engine, it will by default look for
templates with the .hbs extension if no extension is specified in the file name.
Handlebars templates are not able to call arbitrary methods in objects so we can’t just pass the routing context into the template and let the template introspect it like we can with other template engines.
Instead, the context data is available in the template.
If you want to have access to other data like the request path, request params or session data you should add it the context data in a handler before the template handler. For example:
def handler = TemplateHandler.create(engine)
router.get("/dynamic").handler({ routingContext ->
routingContext.put("request_path", routingContext.request().path())
routingContext.put("session_data", routingContext.session().data())
routingContext.next()
})
router.get("/dynamic/").handler(handler)Please consult the Handlebars Java port documentation for how to write handlebars templates.
To use Thymeleaf, you need to add the following dependency to your project:
io.vertx:vertx-web-templ-thymeleaf:3.6.2. Create an instance of the Thymeleaf template engine
using: io.vertx.ext.web.templ.ThymeleafTemplateEngine#create().
When using the Thymeleaf template engine, it will by default look for
templates with the .html extension if no extension is specified in the file name.
The routing context RoutingContext is available
in the Thymeleaf template as the context variable, this means you can render the template based on anything in the context
including the request, response, session or context data.
Here are some examples:
[snip]
<p th:text="${context.get('foo')}"></p>
<p th:text="${context.get('bar')}"></p>
<p th:text="${context.normalisedPath()}"></p>
<p th:text="${context.request().params().get('param1')}"></p>
<p th:text="${context.request().params().get('param2')}"></p>
[snip]
Please consult the Thymeleaf documentation for how to write Thymeleaf templates.
To use Apache FreeMarker, you need to add the following dependency to your project:
io.vertx:vertx-web-templ-freemarker:3.6.2. Create an instance of the Apache FreeMarker template engine
using: io.vertx.ext.web.templ.Engine#create().
When using the Apache FreeMarker template engine, it will by default look for
templates with the .ftl extension if no extension is specified in the file name.
The routing context RoutingContext is available
in the Apache FreeMarker template as the context variable, this means you can render the template based on anything in the context
including the request, response, session or context data.
Here are some examples:
[snip]
<p th:text="${context.foo}"></p>
<p th:text="${context.bar}"></p>
<p th:text="${context.normalisedPath()}"></p>
<p th:text="${context.request().params().param1}"></p>
<p th:text="${context.request().params().param2}"></p>
[snip]
Please consult the Apache FreeMarker documentation for how to write Apache FreeMarker templates.
To use Pebble, you need to add the following dependency to your project:
io.vertx:vertx-web-templ-pebble:3.6.2. Create an instance of the Pebble template engine
using: io.vertx.ext.web.templ.PebbleTemplateEngine#create(vertx).
When using the Pebble template engine, it will by default look for
templates with the .peb extension if no extension is specified in the file name.
The routing context RoutingContext is available
in the Pebble template as the context variable, this means you can render the template based on anything in the context
including the request, response, session or context data.
Here are some examples:
[snip]
<p th:text="{{context.foo}}"></p>
<p th:text="{{context.bar}}"></p>
<p th:text="{{context.normalisedPath()}}"></p>
<p th:text="{{context.request().params().param1}}"></p>
<p th:text="{{context.request().params().param2}}"></p>
[snip]
Please consult the Pebble documentation for how to write Pebble templates.
During development you might want to disable template caching so that the template gets reevaluated on each request.
In order to do this you need to set the system property: io.vertx.ext.web.TemplateEngine.disableCache to true.
By default it will be false. So caching is always enabled.
You can render your own errors using a template handler or otherwise but Vert.x-Web also includes an out of the boxy "pretty" error handler that can render error pages for you.
The handler is ErrorHandler. To use the error handler just set it as a
failure handler for any paths that you want covered.
Vert.x-Web includes a handler LoggerHandler that you can use to log HTTP requests.
By default requests are logged to the Vert.x logger which can be configured to use JUL logging, log4j or SLF4J.
See LoggerFormat.
Vert.x-Web includes the handler FaviconHandler especially for serving favicons.
Favicons can be specified using a path to the filesystem, or by default Vert.x-Web will look for a file on the classpath
with the name favicon.ico. This means you bundle the favicon in the jar of your application.
Vert.x-Web includes a timeout handler that you can use to timeout requests if they take too long to process.
This is configured using an instance of TimeoutHandler.
If a request times out before the response is written a 503 response will be returned to the client.
Here’s an example of using a timeout handler which will timeout all requests to paths starting with /foo after 5
seconds:
router.route("/foo/").handler(TimeoutHandler.create(5000))This handler sets the header x-response-time response header containing the time from when the request was received
to when the response headers were written, in ms., e.g.:
x-response-time: 1456ms
The ResponseContentTypeHandler can set the Content-Type header automatically.
Suppose we are building a RESTful web application. We need to set the content type in all our handlers:
router.get("/api/books").produces("application/json").handler({ rc ->
this.findBooks({ ar ->
if (ar.succeeded()) {
rc.response().putHeader("Content-Type", "application/json").end(this.toJson(ar.result()))
} else {
rc.fail(ar.cause())
}
})
})If the API surface becomes pretty large, setting the content type can become cumbersome.
To avoid this situation, add the ResponseContentTypeHandler to the corresponding routes:
router.route("/api/*").handler(ResponseContentTypeHandler.create())
router.get("/api/books").produces("application/json").handler({ rc ->
this.findBooks({ ar ->
if (ar.succeeded()) {
rc.response().end(this.toJson(ar.result()))
} else {
rc.fail(ar.cause())
}
})
})The handler gets the approriate content type from getAcceptableContentType.
As a consequence, you can easily share the same handler to produce data of different types:
router.route("/api/*").handler(ResponseContentTypeHandler.create())
router.get("/api/books").produces("text/xml").produces("application/json").handler({ rc ->
this.findBooks({ ar ->
if (ar.succeeded()) {
if (rc.getAcceptableContentType() == "text/xml") {
rc.response().end(this.toXML(ar.result()))
} else {
rc.response().end(this.toJson(ar.result()))
}
} else {
rc.fail(ar.cause())
}
})
})SockJS is a client side JavaScript library and protocol which provides a simple WebSocket-like interface allowing you to make connections to SockJS servers irrespective of whether the actual browser or network will allow real WebSockets.
It does this by supporting various different transports between browser and server, and choosing one at run-time according to browser and network capabilities.
All this is transparent to you - you are simply presented with the WebSocket-like interface which just works.
Please see the SockJS website for more information on SockJS.
Vert.x provides an out of the box handler called SockJSHandler for
using SockJS in your Vert.x-Web applications.
You should create one handler per SockJS application using SockJSHandler.create.
You can also specify configuration options when creating the instance. The configuration options are described with
an instance of SockJSHandlerOptions.
def router = Router.router(vertx)
def options = [
heartbeatInterval:2000
]
def sockJSHandler = SockJSHandler.create(vertx, options)
router.route("/myapp/*").handler(sockJSHandler)On the server-side you set a handler on the SockJS handler, and this will be called every time a SockJS connection is made from a client:
The object passed into the handler is a SockJSSocket. This has a familiar
socket-like interface which you can read and write to similarly to a NetSocket or
a WebSocket. It also implements ReadStream and
WriteStream so you can pump it to and from other read and write streams.
Here’s an example of a simple SockJS handler that simply echoes back any back any data that it reads:
def router = Router.router(vertx)
def options = [
heartbeatInterval:2000
]
def sockJSHandler = SockJSHandler.create(vertx, options)
sockJSHandler.socketHandler({ sockJSSocket ->
// Just echo the data back
sockJSSocket.handler(sockJSSocket.&write)
})
router.route("/myapp/*").handler(sockJSHandler)In client side JavaScript you use the SockJS client side library to make connections.
You can find that here.
Full details for using the SockJS JavaScript client are on the SockJS website, but in summary you use it something like this:
var sock = new SockJS('http://mydomain.com/myapp');
sock.onopen = function() {
console.log('open');
};
sock.onmessage = function(e) {
console.log('message', e.data);
};
sock.onclose = function() {
console.log('close');
};
sock.send('test');
sock.close();
The handler can be configured with various options using SockJSHandlerOptions.
insertJSESSIONIDInsert a JSESSIONID cookie so load-balancers ensure requests for a specific SockJS session
are always routed to the correct server. Default is true.
sessionTimeoutThe server sends a close event when a client receiving connection have not been seen for a while.
This delay is configured by this setting. By default the close event will be emitted when a receiving
connection wasn’t seen for 5 seconds.
heartbeatIntervalIn order to keep proxies and load balancers from closing long running http requests we need to pretend that the connection is active and send a heartbeat packet once in a while. This setting controls how often this is done. By default a heartbeat packet is sent every 25 seconds.
maxBytesStreamingMost streaming transports save responses on the client side and don’t free memory used
by delivered messages. Such transports need to be garbage-collected once in a while. max_bytes_streaming sets a
minimum number of bytes that can be send over a single http streaming request before it will be closed. After that
client needs to open new request. Setting this value to one effectively disables streaming and will make streaming
transports to behave like polling transports. The default value is 128K.
libraryURLTransports which don’t support cross-domain communication natively ('eventsource' to name one)
use an iframe trick. A simple page is served from the SockJS server (using its foreign domain) and is placed in an
invisible iframe. Code run from this iframe doesn’t need to worry about cross-domain issues, as it’s being run from
domain local to the SockJS server. This iframe also does need to load SockJS javascript client library, and this option
lets you specify its url (if you’re unsure, point it to the latest minified SockJS client release, this is the default).
The default value is http://cdn.jsdelivr.net/sockjs/0.3.4/sockjs.min.js
disabledTransportsThis is a list of transports that you want to disable. Possible values are WEBSOCKET, EVENT_SOURCE, HTML_FILE, JSON_P, XHR.
Vert.x-Web comes with a built-in SockJS socket handler called the event bus bridge which effectively extends the server-side Vert.x event bus into client side JavaScript.
This creates a distributed event bus which not only spans multiple Vert.x instances on the server side, but includes client side JavaScript running in browsers.
We can therefore create a huge distributed bus encompassing many browsers and servers. The browsers don’t have to be connected to the same server as long as the servers are connected.
This is done by providing a simple client side JavaScript library called vertx-eventbus.js which provides an API
very similar to the server-side Vert.x event-bus API, which allows you to send and publish messages to the event bus
and register handlers to receive messages.
This JavaScript library uses the JavaScript SockJS client to tunnel the event bus traffic over SockJS connections
terminating at at a SockJSHandler on the server-side.
A special SockJS socket handler is then installed on the SockJSHandler which
handles the SockJS data and bridges it to and from the server side event bus.
To activate the bridge you simply call
bridge on the
SockJS handler.
def router = Router.router(vertx)
def sockJSHandler = SockJSHandler.create(vertx)
def options = [:]
sockJSHandler.bridge(options)
router.route("/eventbus/*").handler(sockJSHandler)In client side JavaScript you use the 'vertx-eventbus.js` library to create connections to the event bus and to send and receive messages:
<script src="http://cdn.jsdelivr.net/sockjs/0.3.4/sockjs.min.js"></script>
<script src='vertx-eventbus.js'></script>
<script>
var eb = new EventBus('http://localhost:8080/eventbus');
eb.onopen = function() {
// set a handler to receive a message
eb.registerHandler('some-address', function(error, message) {
console.log('received a message: ' + JSON.stringify(message));
});
// send a message
eb.send('some-address', {name: 'tim', age: 587});
}
</script>The first thing the example does is to create a instance of the event bus
var eb = new EventBus('http://localhost:8080/eventbus');The parameter to the constructor is the URI where to connect to the event bus. Since we create our bridge with
the prefix eventbus we will connect there.
You can’t actually do anything with the connection until it is opened. When it is open the onopen handler will be called.
The bridge supports automatic reconnection, with configurable delay and backoff options.
var eb = new EventBus('http://localhost:8080/eventbus');
eb.enableReconnect(true);
eb.onopen = function() {}; // Set up handlers here, will be called on initial connection and all reconnections
eb.onreconnect = function() {}; // Optional, will only be called on reconnections
// Alternatively, pass in an options object
var options = {
vertxbus_reconnect_attempts_max: Infinity, // Max reconnect attempts
vertxbus_reconnect_delay_min: 1000, // Initial delay (in ms) before first reconnect attempt
vertxbus_reconnect_delay_max: 5000, // Max delay (in ms) between reconnect attempts
vertxbus_reconnect_exponent: 2, // Exponential backoff factor
vertxbus_randomization_factor: 0.5 // Randomization factor between 0 and 1
};
var eb2 = new EventBus('http://localhost:8080/eventbus', options);
eb2.enableReconnect(true);
// Set up handlers...You can retrieve the client library using a dependency manager:
Maven (in your pom.xml):
<dependency>
<groupId>io.vertx</groupId>
<artifactId>vertx-web</artifactId>
<version>3.6.2</version>
<classifier>client</classifier>
<type>js</type>
</dependency>Gradle (in your build.gradle file):
compile 'io.vertx:vertx-web:3.6.2:client'The library is also available on:
Notice that the API has changed between the 3.0.0 and 3.1.0 version. Please check the changelog. The previous client is still compatible and can still be used, but the new client offers more feature and is closer to the vert.x event bus API.
If you started a bridge like in the above example without securing it, and attempted to send messages through it you’d find that the messages mysteriously disappeared. What happened to them?
For most applications you probably don’t want client side JavaScript being able to send just any message to any handlers on the server side or to all other browsers.
For example, you may have a service on the event bus which allows data to be accessed or deleted. We don’t want badly behaved or malicious clients being able to delete all the data in your database!
Also, we don’t necessarily want any client to be able to listen in on any event bus address.
To deal with this, a SockJS bridge will by default refuse to let through any messages. It’s up to you to tell the bridge what messages are ok for it to pass through. (There is an exception for reply messages which are always allowed through).
In other words the bridge acts like a kind of firewall which has a default deny-all policy.
Configuring the bridge to tell it what messages it should pass through is easy.
You can specify which matches you want to allow for inbound and outbound traffic using the
BridgeOptions that you pass in when calling bridge.
Each match is a PermittedOptions object:
setAddressThis represents the exact address the message is being sent to. If you want to allow messages based on an exact address you use this field.
setAddressRegexThis is a regular expression that will be matched against the address. If you want to allow messages
based on a regular expression you use this field. If the address field is specified this field will be ignored.
setMatchThis allows you to allow messages based on their structure. Any fields in the match must exist in the message with the same values for them to be allowed. This currently only works with JSON messages.
If a message is in-bound (i.e. being sent from client side JavaScript to the server) when it is received Vert.x-Web will look through any inbound permitted matches. If any match, it will be allowed through.
If a message is out-bound (i.e. being sent from the server to client side JavaScript) before it is sent to the client Vert.x-Web will look through any outbound permitted matches. If any match, it will be allowed through.
The actual matching works as follows:
If an address field has been specified then the address must match exactly with the address of the message
for it to be considered matched.
If an address field has not been specified and an addressRegex field has been specified then the regular expression
in address_re must match with the address of the message for it to be considered matched.
If a match field has been specified, then also the structure of the message must match. Structuring matching works
by looking at all the fields and values in the match object and checking they all exist in the actual message body.
Here’s an example:
def router = Router.router(vertx)
def sockJSHandler = SockJSHandler.create(vertx)
// Let through any messages sent to 'demo.orderMgr' from the client
def inboundPermitted1 = [
address:"demo.orderMgr"
]
// Allow calls to the address 'demo.persistor' from the client as long as the messages
// have an action field with value 'find' and a collection field with value
// 'albums'
def inboundPermitted2 = [
address:"demo.persistor",
match:[
action:"find",
collection:"albums"
]
]
// Allow through any message with a field `wibble` with value `foo`.
def inboundPermitted3 = [
match:[
wibble:"foo"
]
]
// First let's define what we're going to allow from server -> client
// Let through any messages coming from address 'ticker.mystock'
def outboundPermitted1 = [
address:"ticker.mystock"
]
// Let through any messages from addresses starting with "news." (e.g. news.europe, news.usa, etc)
def outboundPermitted2 = [
addressRegex:"news\\..+"
]
// Let's define what we're going to allow from client -> server
def options = [
inboundPermitteds:[
inboundPermitted1,
inboundPermitted1,
inboundPermitted3
],
outboundPermitteds:[
outboundPermitted1,
outboundPermitted2
]
]
sockJSHandler.bridge(options)
router.route("/eventbus/*").handler(sockJSHandler)The event bus bridge can also be configured to use the Vert.x-Web authorisation functionality to require authorisation for messages, either in-bound or out-bound on the bridge.
To do this, you can add extra fields to the match described in the previous section that determine what authority is required for the match.
To declare that a specific authority for the logged-in user is required in order to access allow the messages you use the
setRequiredAuthority field.
Here’s an example:
// Let through any messages sent to 'demo.orderService' from the client
def inboundPermitted = [
address:"demo.orderService"
]
// But only if the user is logged in and has the authority "place_orders"
inboundPermitted.requiredAuthority = "place_orders"
def options = [
inboundPermitteds:[
inboundPermitted
]
]For the user to be authorised they must be first logged in and secondly have the required authority.
To handle the login and actually auth you can configure the normal Vert.x auth handlers. For example:
def router = Router.router(vertx)
// Let through any messages sent to 'demo.orderService' from the client
def inboundPermitted = [
address:"demo.orderService"
]
// But only if the user is logged in and has the authority "place_orders"
inboundPermitted.requiredAuthority = "place_orders"
def sockJSHandler = SockJSHandler.create(vertx)
sockJSHandler.bridge([
inboundPermitteds:[
inboundPermitted
]
])
// Now set up some basic auth handling:
router.route().handler(CookieHandler.create())
router.route().handler(SessionHandler.create(LocalSessionStore.create(vertx)))
def basicAuthHandler = BasicAuthHandler.create(authProvider)
router.route("/eventbus/*").handler(basicAuthHandler)
router.route("/eventbus/*").handler(sockJSHandler)If you want to be notified when an event occurs on the bridge you can provide a handler when calling
bridge.
Whenever an event occurs on the bridge it will be passed to the handler. The event is described by an instance of
BridgeEvent.
The event can be one of the following types:
This event will occur when a new SockJS socket is created.
This event will occur when SockJS socket is on idle for longer period of time than initially configured.
This event will occur when the last ping timestamp is updated for the SockJS socket.
This event will occur when a SockJS socket is closed.
This event will occur when a message is attempted to be sent from the client to the server.
This event will occur when a message is attempted to be published from the client to the server.
This event will occur when a message is attempted to be delivered from the server to the client.
This event will occur when a client attempts to register a handler.
This event will occur when a client attempts to unregister a handler.
The event enables you to retrieve the type using type and
inspect the raw message of the event using getRawMessage.
The raw message is a JSON object with the following structure:
{
"type": "send"|"publish"|"receive"|"register"|"unregister",
"address": the event bus address being sent/published/registered/unregistered
"body": the body of the message
}
The event is also an instance of Future. When you are finished handling the event you can
complete the future with true to enable further processing.
If you don’t want the event to be processed you can complete the future with false. This is a useful feature that
enables you to do your own filtering on messages passing through the bridge, or perhaps apply some fine grained
authorisation or metrics.
Here’s an example where we reject all messages flowing through the bridge if they contain the word "Armadillos".
def router = Router.router(vertx)
// Let through any messages sent to 'demo.orderMgr' from the client
def inboundPermitted = [
address:"demo.someService"
]
def sockJSHandler = SockJSHandler.create(vertx)
def options = [
inboundPermitteds:[
inboundPermitted
]
]
sockJSHandler.bridge(options, { be ->
if (be.type() == BridgeEventType.PUBLISH || be.type() == BridgeEventType.RECEIVE) {
if (be.getRawMessage().body == "armadillos") {
// Reject it
be.complete(false)
return
}
}
be.complete(true)
})
router.route("/eventbus/*").handler(sockJSHandler)Here’s an example how to configure and handle SOCKET_IDLE bridge event type.
Notice setPingTimeout(5000) which says that if ping message doesn’t arrive from client within 5 seconds
then the SOCKET_IDLE bridge event would be triggered.
def router = Router.router(vertx)
// Initialize SockJS handler
def sockJSHandler = SockJSHandler.create(vertx)
def options = [
inboundPermitteds:[
inboundPermitted
],
pingTimeout:5000
]
sockJSHandler.bridge(options, { be ->
if (be.type() == BridgeEventType.SOCKET_IDLE) {
// Do some custom handling...
}
be.complete(true)
})
router.route("/eventbus/*").handler(sockJSHandler)In client side JavaScript you use the 'vertx-eventbus.js` library to create connections to the event bus and to send and receive messages:
<script src="http://cdn.jsdelivr.net/sockjs/0.3.4/sockjs.min.js"></script>
<script src='vertx-eventbus.js'></script>
<script>
var eb = new EventBus('http://localhost:8080/eventbus', {"vertxbus_ping_interval": 300000}); // sends ping every 5 minutes.
eb.onopen = function() {
// set a handler to receive a message
eb.registerHandler('some-address', function(error, message) {
console.log('received a message: ' + JSON.stringify(message));
});
// send a message
eb.send('some-address', {name: 'tim', age: 587});
}
</script>The first thing the example does is to create a instance of the event bus
var eb = new EventBus('http://localhost:8080/eventbus', {"vertxbus_ping_interval": 300000});The 2nd parameter to the constructor tells the sockjs library to send ping message every 5 minutes. since the server
was configured to expect ping every 5 seconds → SOCKET_IDLE would be triggered on the server.
You can also amend the raw message, e.g. change the body. For messages that are flowing in from the client you can also add headers to the message, here’s an example:
def router = Router.router(vertx)
// Let through any messages sent to 'demo.orderService' from the client
def inboundPermitted = [
address:"demo.orderService"
]
def sockJSHandler = SockJSHandler.create(vertx)
def options = [
inboundPermitteds:[
inboundPermitted
]
]
sockJSHandler.bridge(options, { be ->
if (be.type() == BridgeEventType.PUBLISH || be.type() == BridgeEventType.SEND) {
// Add some headers
def headers = [
header1:"val",
header2:"val2"
]
def rawMessage = be.getRawMessage()
rawMessage.headers = headers
be.setRawMessage(rawMessage)
}
be.complete(true)
})
router.route("/eventbus/*").handler(sockJSHandler)CSRF or sometimes also known as XSRF is a technique by which an unauthorized site can gain your user’s private data.
Vert.x-Web includes a handler CSRFHandler that you can use to prevent cross site
request forgery requests.
On each get request under this handler a cookie is added to the response with a unique token. Clients are then expected to return this token back in a header. Since cookies are sent it is required that the cookie handler is also present on the router.
When developing non single page applications that rely on the User-Agent to perform the POST action, Headers cannot
be specified on HTML Forms. In order to solve this problem the header value will also be checked if and only if no
header was present in the Form attributes under the same name as the header, e.g.:
---
<form action="/submit" method="POST">
<input type="hidden" name="X-XSRF-TOKEN" value="abracadabra">
</form>
---It is the responsibility of the user to fill in the right value for the form field. Users who prefer to use an HTML
only solution can fill this value by fetching the the token value from the routing context under the key X-XSRF-TOKEN
or the header name they have chosen during the instantiation of the CSRFHandler object.
router.route().handler(CookieHandler.create())
router.route().handler(CSRFHandler.create("abracadabra"))
router.route().handler({ rc ->
})When accessing protected routes via ajax both the csrf token will need to be passed in the request. Typically this is done using a request header, as adding a request header can typically be done at a central location easily without payload modification.
The CSRF token is obtained from the server side context under the key X-XSRF-TOKEN (unless you specified a different
name). This token needs to be exposed to the client-side, typically by including it in the initial page content. One
possibility is to store it in an HTML <meta> tag, where value can then be retrieved at the time of the request by
JavaScript.
The following can be included in your view (handlebar example below):
<meta name="csrf-token" content="${X-XSRF-TOKEN}">The following is an example of using the Fetch API to post to the /process route with the CSRF token from the <meta> tag on the page:
// Read the CSRF token from the <meta> tag
var token = document.querySelector('meta[name="csrf-token"]').getAttribute('content')
// Make a request using the Fetch API
fetch('/process', {
credentials: 'same-origin', // <-- includes cookies in the request
headers: {
'X-XSRF-TOKEN': token // <-- is the csrf token as a header
},
method: 'POST',
body: {
key: 'value'
}
})The Virtual Host Handler will verify the request hostname and if it matches it will send the request to the registered handler, otherwise will continue inside the normal handlers chain.
Request are checked against the Host header to a match and patterns allow the usage of wildcards, as for
example .vertx.io or fully domain names as www.vertx.io.
router.route().handler(VirtualHostHandler.create("*.vertx.io", { routingContext ->
// do something if the request is for *.vertx.io
}))The OAuth2AuthHandler allows quick setup of secure routes using the OAuth2 protocol. This handler simplifies the
authCode flow. An example of using it to protect some resource and authenticate with GitHub can be implemented as:
// create an OAuth2 provider, clientID and clientSecret should be requested to github
def authProvider = GithubAuth.create(vertx, "CLIENT_ID", "CLIENT_SECRET")
// create a oauth2 handler on our running server
// the second argument is the full url to the callback as you entered in your provider management console.
def oauth2 = OAuth2AuthHandler.create(authProvider, "https://myserver.com/callback")
// setup the callback handler for receiving the GitHub callback
oauth2.setupCallback(router.route())
// protect everything under /protected
router.route("/protected/*").handler(oauth2)
// mount some handler under the protected zone
router.route("/protected/somepage").handler({ rc ->
rc.response().end("Welcome to the protected resource!")
})
// welcome page
router.get("/").handler({ ctx ->
ctx.response().putHeader("content-type", "text/html").end("Hello<br><a href=\"/protected/somepage\">Protected by Github</a>")
})The OAuth2AuthHandler will setup a proper callback OAuth2 handler so the user does not need to deal with validation of the authority server response. It is quite important to know that authority server responses are only valid once, this means that if a client issues a reload of the callback URL it will be asserted as a invalid request since the validation will fail.
A rule of thumb is once a valid callback is executed issue a client side redirect to a protected resource. This redirect should also create a session cookie (or other session mechanism) so the user is not required to authenticate for every request.
Due to the nature of OAuth2 spec there are slight changes required in order to use other OAuth2 providers but vertx-auth provides you with many out of the box implementations:
Azure Active Directory AzureADAuth
Box.com BoxAuth
Dropbox DropboxAuth
Facebook FacebookAuth
Foursquare FoursquareAuth
Github GithubAuth
Google GoogleAuth
Instagram InstagramAuth
Keycloak KeycloakAuth
LinkedIn LinkedInAuth
Mailchimp MailchimpAuth
Salesforce SalesforceAuth
Shopify ShopifyAuth
Soundcloud SoundcloudAuth
Stripe StripeAuth
Twitter TwitterAuth
However if you’re using an unlisted provider you can still do it using the base API like this:
// create an OAuth2 provider, clientID and clientSecret should be requested to Google
def authProvider = OAuth2Auth.create(vertx, OAuth2FlowType.AUTH_CODE, [
clientID:"CLIENT_ID",
clientSecret:"CLIENT_SECRET",
site:"https://accounts.google.com",
tokenPath:"https://www.googleapis.com/oauth2/v3/token",
authorizationPath:"/o/oauth2/auth"
])
// create a oauth2 handler on our domain: "http://localhost:8080"
def oauth2 = OAuth2AuthHandler.create(authProvider, "http://localhost:8080")
// these are the scopes
oauth2.addAuthority("profile")
// setup the callback handler for receiving the Google callback
oauth2.setupCallback(router.get("/callback"))
// protect everything under /protected
router.route("/protected/*").handler(oauth2)
// mount some handler under the protected zone
router.route("/protected/somepage").handler({ rc ->
rc.response().end("Welcome to the protected resource!")
})
// welcome page
router.get("/").handler({ ctx ->
ctx.response().putHeader("content-type", "text/html").end("Hello<br><a href=\"/protected/somepage\">Protected by Google</a>")
})You will need to provide all the details of your provider manually but the end result is the same.
The handler will pin your application the the configured callback url. The usage is simple as providing the handler
a route instance and all setup will be done for you. In a typical use case your provider will ask you what is the
callback url to your application, your then enter a url like: https://myserver.com/callback. This is the second
argument to the handler now you just need to set it up. To make it easier to the end user all you need to do is call
the setupCallback method.
This is how you pin your handler to the server https://myserver.com:8447/callback. Note that the port number is not
mandatory for the default values, 80 for http, 443 for https.
// create a oauth2 handler pinned to myserver.com: "https://myserver.com:8447/callback"
def oauth2 = OAuth2AuthHandler.create(provider, "https://myserver.com:8447/callback")
// now allow the handler to setup the callback url for you
oauth2.setupCallback(router.route())In the example the route object is created inline by Router.route() however if you want to have full control of the
order the handler is called (for example you want it to be called as soon as possible in the chain) you can always
create the route object before and pass it as a reference to this method.
Up to now you have learned how to use the Oauth2 Handler however you will notice that for each request you will need to authenticate. This is because the handler has no state and there was no state management applied in the examples.
Although having no state is recommended for API facing endpoints, for example, using JWT (we will cover those later) for user facing endpoinst we can keep the authentication result stored in the session. For this to work we would need an application like the following snippet:
// To simplify the development of the web components
// we use a Router to route all HTTP requests
// to organize our code in a reusable way.
// We need cookies and sessions
router.route().handler(CookieHandler.create())
router.route().handler(SessionHandler.create(LocalSessionStore.create(vertx)))
// Simple auth service which uses a GitHub to
// authenticate the user
def authProvider = GithubAuth.create(vertx, "YOUR PROVIDER CLIENTID", "YOUR PROVIDER CLIENT SECRET")
// We need a user session handler too to make sure
// the user is stored in the session between requests
router.route().handler(UserSessionHandler.create(authProvider))
// we now protect the resource under the path "/protected"
router.route("/protected").handler(OAuth2AuthHandler.create(authProvider).setupCallback(router.route("/callback")).addAuthority("user:email"))
// Entry point to the application, this will render
// a custom template.
router.get("/").handler({ ctx ->
ctx.response().putHeader("Content-Type", "text/html").end("<html>\n <body>\n <p>\n Well, hello there!\n </p>\n <p>\n We're going to the protected resource, if there is no\n user in the session we will talk to the GitHub API. Ready?\n <a href=\"/protected\">Click here</a> to begin!</a>\n </p>\n <p>\n <b>If that link doesn't work</b>, remember to provide\n your own <a href=\"https://github.com/settings/applications/new\">\n Client ID</a>!\n </p>\n </body>\n</html>")
})
// The protected resource
router.get("/protected").handler({ ctx ->
// at this moment your user object should contain the info
// from the Oauth2 response, since this is a protected resource
// as specified above in the handler config the user object is never null
def user = ctx.user()
// just dump it to the client for demo purposes
ctx.response().end(user.toString())
})Some providers use JWT tokens as access tokens, this is a feature of RFC6750 and can be quite useful when one wants to mix client based authentication and API authorization. For example say that you have a application that provides some protected HTML documents but you also want it to be available for API’s to consume. In this case an API cannot easily perform the redirect handshake required by OAuth2 but can use a Token provided before hand.
This is handled automatically by the handler as long as the provider is configured to support JWTs.
In real life this means that your API’s can access your protected resources using the header Authorization with the
value Bearer BASE64_ACCESS_TOKEN.